$6032.05
The Sprint 60L is used to fluidize the powder in a 60 liter stainless steel tank. All coating parameters are set and saved using the control unit EPGSprint X . In combination with the PEMX 1, perfect surfaces are achieved.
Included Items
-Corona manual gun PEM-X1
-Control device EPG-Sprint X
-Injector PI-F1
-Device cart (optional with a vibrating table)
-Powder hose 5m (Ø 11mm)
-Mains cable 3m
-Grounding cable 10m
-Connection hose
-Different stainless steel containers (sold separately)
Technical Data | |
Input voltage | 85-250 V |
Input power | 40 W |
Input frequency | 50-60 Hz |
Protection class | IP 64 |
Air inlet pressure | 0.6-0.8 Mpa, 6.0-8.0 bar, 87-116 PSI |
Air inlet connection | G 1/4″i |
Exhaust air flow | 0.05-20.0 Nm3/h |
Operating temperature | 5-45 °C, 41.0-113.0 °F |
Weight | 38.0 kg, 83.8 lb |
Special Advantages
-Corona manual gun with an air-flushed high-performance cascade Constant and reliable coating performance
-Fully fluidized stainless steel container Optimal powder preparation for high quality requirements
-Clear and user-friendly operating interface For quickly and easily adjusting the coating parameters
Processable Materials
-Polyester powder coatings
-Epoxy powder coatings
-Metallic powder coatings
-Acrylic powder coatings
-UDS powder coatings
-Effect powder coatings
