$570.38
The PANTHER 200H HVLP is our heavy-duty HVLP air spray gun excellent for spraying in harsh environments. The Teflon anodized finish makes the P200H perfect for zinc-rich, glues, CARC, or any coating that makes clean-up difficult. This gun has a heavy-duty needle spring, air adjusting valve, self-adjusting needle, and air valve packing. PANTHER guns come standard with stainless steel fluid passages. This gun complies with all environmental regulations for HVLP.
Included Items
Specifications:
-Air Inlet – 1/4” NPS (m)
-Fluid Inlet – 3/8 NPS (m)
-Weight – 20 oz.
-Teflon hard coated body
-CFM is dependant on Air Cap
MATERIAL TYPE | FLUID ORIFICE x AIR CAP | MAXIMUM PATTERN WIDTH | PRESS./SIPHON |
Very Thin |
|
|
|
less than 16 sec. Zahn #2 | 1.1 mm x 1028 | 11 | P |
inks, dyes, solvents, stains | 1.1 mm x 1033 | 9 | P |
Thin |
|
|
|
16 to 20 sec. Zahn #2 | 1.1, 1.4 mm x 1057 | 11 | P/S |
lacquers, enamels, primers, sealers | 1.1, 1.4 mm x 1100 | 12 | P/S |
Medium | 1.4 mm x 1057 | 11 | P/S |
21 to 30 sec. Zahn #2 | 1.4 mm x 1100 | 12 | P/S |
automotivebase coat enamels, primers, | 1.4 mm x 1046 | 11 | P |
epoxies, urethanes automotive clear coat | 1.4 mm x 1083 | 13 | P |
Heavy | 1.8, 2.2 mm x 1046 | 11 | P |
Over 30 sec. Zahn #2 | |||
heavy body primers, high solid enamels, | 1.8, 2.2 mm x 1083 | 13 | P |
high solid automotive coatings adhesives |
