$4788.41
Within the WAGNER product range there are two different collector nozzles – for standard injector and HiCoat-ED injector. The standard collector nozzle is suited to all conventional powder coating applications. Where as the HiCoat-ED collector nozzle is best suited to low powder output and low air consumption applications.
Included Items
-PEM-X1 Corona manual gun
-Flat or round jet nozzle package
-Control unit EPG Sprint X
-Power cable 3m
-Injector PI-F1
-Connection hoses
-Powder hose (Ø 11mm)
-Ground cable 10 m
-Recipe sticker
-The gun and the control unit‘s printed OM
Technical Data | |
Input voltage | 85-250 V |
Input power | 40 W |
Input frequency | 47-440 Hz |
Protection class | IP 64 |
Air inlet pressure | 0.6-0.8 Mpa, 6.0-8.0 bar, 87-116 PSI |
Air inlet connection | 8 mm |
Operating temperature | 5-45 °C, 41.0-113.0 °F |
Weight | 8.9 kg, 19.6 lb |
Special Advantages
-Corona manual gun with an air-flushed high-performance cascade Constant and reliable coating performance
-Ergonomic and perfectly balanced gun Continuous, pleasant working without tiring with a gun that only weighs 490g
-Control unit with a regulated air volume cycle.
-A constant compressed air quantity despite fluctuations in the mains
Processable Materials
-Polyester powder coatings
-Epoxy powder coatings
-Metallic powder coatings
-Acrylic powder coatings
-UDS powder coatings
-Effect powder coatings
